Studio Care

Features:

• 6 inputs
• 2 mic channels
• 2 stereo channels
• 2 band EQ
• USB record/playback

Specifications:

• Channels: 6
• Mic Inputs: 2
• Stereo Inputs: 4
• Frequency Responce: 20Hz – 20kHz (+/-1dB)
• Distortion: <0.08% @ -10dBu
• Residual Noise: <-98dB
• Gain Range: 0dB to +45dB(Mic), -20dB to +25dB(Line)
• Input Impedance: 20k ohm(bal) 24k ohm(un-bal)
• EQ: Hi, Lo
• Maximum Output: +21dB +/-2dB
• Output Impedance: 1k ohm(record), 25k ohm(headphones)
• USB: 2 channel playback/record
• Dimension W*H*D: 244 x 165 x 75 (mm)
• Power Supply: Wall adaptor 100-240V ~ 50/60Hz
• Power Consumption: 11W

Take the step to the DJ booth seamlessly with the DJM-750MK2, a 4-channel mixer which inherits key features and design elements from the DJM-900NXS2, creating a club-style setup when combined with our professional CDJ or XDJ multi players.

You can perform seamless mixes on the DJM-750MK2 thanks to the smooth curves on the EQs and channel faders. The Magvel crossfader, inherited from the DJM-900NXS2, gives a precise response and assured feel during even the most complicated scratch techniques.

  Professional audio mixing consoles with 18 mic / 20 line inputs.

•  MON:Ster (mono-stereo) inputs for full flexibility.

•  One Knob Compressor on channels 1-8.

•  Ultra low-noise preamps with wide headroom and dynamic range.

•  Dual multi-EFX processor with 24 DSP presets and editable parameters.

•  Provisions to route EFX to monitor via Aux 1 and Aux 2.

•  Built-in USB MP3 media player and recorder with Bluetooth.

•  Level control, 2-band EQ with internal/external media input selection.

•  75Hz low cut on mono channels.

•  4-band EQ on all inputs.

•  5 Aux sends - Aux 1-3 (with pre/post selection) and Aux 4-5 (post only).

•  Stereo AUX returns.

•  Balanced XLR and ¼” jack main outputs.

•  2 sub groups with individual ¼” outputs.

•  Insert (send/return) on first 4 mono channels and main output.

•  Mute, solo, group (G1-G2) and main (L-R) routing per channel.

•  Peak, comp, mute and solo LEDs per channel.

•  Stereo RCA input and record output.

•  Headphone output with level control.

•  Globally switched +48V Phantom power supply.

•  Responsive 60mm faders.

•  7-band stereo graphic equalizer on main output.

•  Dual 10-segment LED meter for main, group and solo outputs.

•  Ergonomic angled-design for better visibility.

•  Clutter-free rear panel input and output connectivity.

•  Brand Studiomaster Model Studiomaster-Aqua-6 Type Small-Format-Professional-Mixers Nominal Gain (Mic/Line/Stereo Line) 60dB/40dB/20dB Max Gain (Mic/Line/Stereo Line) 80dB/60dB/40dB Input Levels Sensitivity Mic (Gain Min/Gain Max) -10 dBu / -60 dBu Line (Gain Min /Gain Max) +10 dBu / -40 dBu Stereo Line (Gain Min /Gain Max) +10 dBu / -20 dBu Frequency Response 20Hz to 20KHz (+0/-2 dB) Total Harmonic Distortion < 0.006% Equalisation Mono Mic (Treble/Mid/Bass) ±15dB (12KHz HF / 2.5 KHz MF/60Hz LF) Stereo Line (Treble/Mid/Mid/Bass) ±15dB (12KHz HF / 2.5 KHz MF/80Hz LF) Effects 16 Effects, 24 -Bit EFX Processor Phantom supply +48V Dimensions 322 x 317 x 134 Net Weight (Kgs.) 4.5 Warranty as per manufacturer

Focusrite Clarett 2Pre Thunderbolt Audio Interface Features:

• Clarett preamps modeled after classic Focusrite ISA design
• Microphone preamps deliver EIN of -128 dB
• 118 dB A/D and 119 dB D/A dynamic range
• Thunderbolt technology ensures extra-low round-trip latency
• Up to 24-bit/192 kHz sample rates
• Detailed metering
• Expandable over ADAT
• Downloadable Focusrite iOS Control app adjusts cue mixes remotely from iOS devices (iPad, iPhone, or iPod touch)
• AAX Native, Audio Units and VST 64-bit Red 2 and Red 3 Plug-in Suite

• Eight inputs, ten outputs; eight Clarett mic pres with two Hi-Z JFET instrument inputs, ten balanced outputs and eight-in, eight-out over ADAT.
• All-analogue Air mode, with impedance switching, adds presence and clarity to your recordings, recreating the legendary character of the ISA.
• Low distortion, 24-bit/192 kHz converters with up to 124dB dynamic range deliver incredible sound quality.
• Two powerful, flat-response headphone outputs make mixing easy in any environment, with any headphones.
• USB-C connectivity, compatible with MacOS, Windows and iPadOS.
• Includes Ableton Live Lite, three months of Pro Tools Artist, and the Hitmaker Expansion, with plugins from Antares, Softube, Landr, XLN Audio and more.
• Three-year warranty and award-winning customer support for life.

This amplifier is a representation of Dynatech’s continuing commitment to produce the best and highest quality audio products at an affordable price. These amplifiers are designed to provide a big impact in sound reproduction.

The DynaTech V-01 Series is based on the same advanced circuit topologies that have made DynaTech amplifiers the choice of touring professionals worldwide. V-01 Series amplifiers are designed for high operating efficiency and accurate sonic performance across the full audio bandwidth, even under stressful conditions. Internal components are the finest available, and key sub-assemblies are pre-tested before final assembly. Finally, each amplifier is "burned in" and thoroughly tested (using precision audio test equipment) before shipping. In addition, all V-01 Series amplifiers incorporate DynaTech’s exclusive Tour Class protection features to safeguard both internal circuitry and connected loudspeakers. This proven combination of advanced design, quality construction, and comprehensive circuit protection is your guarantee of fail-safe reliability. You can depend on consistent, stable performance even when your V-01 Series amplifier is subjected to punishing extremes in the most demanding fixed or mobile sound reinforcement applications

Play-Anywhere 2-Channel DJ System
Everything you need to mix your music in a setup you can carry anywhere
Use professional features like Mixer FX, Hotcues, and loop controls on a club-standard layout
An integrated high-end audio interface, USB power, and the full version of TRAKTOR PRO 3 included means you're ready to mix wherever you are

House-Party Portability Meets Club-Standard Layout
Whether it’s bass-heavy breakdowns, steppy synths, or peak-time rewinds that define your style, the TRAKTOR KONTROL S2 has everything you need to make your mix happen. Craft sets on two decks and get creative with easy-to-use tools like looping, beat syncing, and club-grade effects.

Playlist To Dancefloor In No Time
Turn the music you listen to into the sets you play, with a streamlined interface that makes blending tracks a breeze. Plug in, line up a few of your favorite tracks, and get mixing wherever you are. You can leave the beatmatching to TRAKTOR, so you have more time to pick tunes that fit the vibe, experiment with FX, use looping and remix decks, and to define your own sound. Whether you’re at a house party, a bar, or the club, you can create mixes made to make you move.

Everything You Need. Where You Need It.
Get your mixes down super-quick: Line up your next track, find the cue point, cut the kick, and bring in some reverb before the drop. Easily access expressive effects and essential controls for chops, stops, and seamless transitions. Get the sound in your head through the speakers in seconds.

Scratch. Spin. Slip.
If your style is very hands-on, we’ve given you a lot of jog wheel to play with. Use it to beatmatch tracks – nudge the deck forward or back with the jog wheels to get a track in sync, use the touch-sensitive top-plate to find your starting position, or even spin it back for high-energy rewinds. Because they’re bigger, nudging, scratching, and scrolling is even easier.

Edit And Re-Edit With Loops And Samples
Timing is everything, as they say. Jump to different parts of a track with cue points, depending on what the crowd needs. Because each is assigned to one of eight pads on each deck, you can play them like an instrument to seriously chop things up. Use loops for longer mixes or for more time to experiment. Everything will always be in sync with the beat, so you’ll never lose the groove.

Make Mixer Fx Your Secret Weapon
You’ve got the perfect playlist down, but it’s what goes on between your tracks that can make all the difference. Build exciting transitions with one-touch control of new Mixer FX on each channel. Open up a big reverb, a dubby delay, or a smooth filter to get your tracks popping during the mix. Choose from eight club-grade effects and three filters, and use up to four at a time with the dedicated Mixer FX control.

Traktor PRO 3 Included
Start spinning straight away on the full version of our flagship DJ software, as used on the world’s largest stages. Find intuitive professional tools that quickly help you define your style.

Software Specification :

TRAKTOR PRO 3
From head-bobbing bar beats to midnight main-room experimentation. With intuitive and powerful tools for soundscape exploration, TRAKTOR PRO 3 makes any mix possible.

Sync That Never Skips a Beat
For mixing samples, loops, using Flux Mode and more. Hit Sync, and TRAKTOR keeps the elements of your mix perfectly matched. This is especially good for more advanced techniques like triggering additional loops and samples, or for syncing external gear with your TRAKTOR setup.

• Yamaha genuine microphone.
• The best directional characteristic for vocal (cardioid).
• Higher sound quality to highlight vocal sound.
• Yamaha original body design.

Maschine Mikro MK3 is a groovebox and sampler for production and performance, combining an iconic workflow with premium instruments and effects. It lets you effortlessly produce beats, melodies, and harmonies with powerful drum synths, premium sounds, an integrated sampler, and more. It comes stocked with everything you need to turn your ideas into complete tracks. Whether you’re sketching and arranging your track, or mixing it down and performing, Maschine keeps you moving from one step to the next, without breaking your creative stride.

Maschine lets you effortlessly produce beats, melodies, and harmonies with powerful drum synths, premium sounds, an integrated sampler, and more. It comes stocked with everything you need to turn your ideas into complete tracks. Whether you’re sketching and arranging your track, or mixing it down and performing, Maschine keeps you moving from one step to the next, without breaking your creative stride.

This reference manual provides a comprehensive description of all Maschine Mikro MK3 features. To explore the Maschine Mikro MK3 manual, click Table of Contents on the left of the page or enter a word or phrase in the search field. You can also download this manual as a PDF and access other documentation online:

If you’ve been DJing on two channels so far, doubling down on decks means way more freedom in your mix – like Layering beats, firing off samples, or keeping a Banger track parked on deck C. Whether you’re throwing in acapellas or love a double drop, four decks make it happen. At the heart of the tractor control S3 is the four-channel mixer, with full-length faders, EQ, cueing, and mixer FX control over each deck. Juggle hotcues, samples, and loops with eight RGB pads on each deck. When it’s time to take things further, switch decks and keep on-track with the jog wheel light rings. When it’s time to get your mix on, there’s plenty of jog wheel to go around. Touch-sensitive and super smooth, they’re not just for nudging and stalling, but feel great for scratch workouts too. Rgb light rings let you know which deck is playing at a glance, and warn you when you’re almost out of track. Fire off samples, loop drum patterns, chop in vocal cuts, or even work your own productions into the mix if that’s your thing. Loop any part of a track and assign it to a pad, or skip to any part of your track using hotcues. Traktor Pro’s beat sync means you’ll never lose the groove. Cut the kick and open a reverb, or chop things up with a dotted delay – mixer FX are one-touch effects on each channel, great for building energy, shaping your sound, or just going wild. Choose from eight effects and three filters, and assign them to the dedicated slots on the mixer for quick access. Traktor control S3 comes paired with the full version of Traktor Pro 3 – packed with expressive features and re-edit tools for truly unique, performative mixing. Grab a portable speaker, hook up an iPad, and take your S3 on the road With Traktor DJ 2 – mix with two channels on a streamlined interface, and dig through a bottomless record crate with Soundcloud go+ integration. Set up and spin with punchy, pro-grade XLR and RCA main outputs with a huge dynamic range, as well as a ¼” TRS booth output, and 3. 5/ 6. 3 mm

PreSonus Studio 24c 2x2, 192 kHz, USB-C Audio Interface, 2 Mic Pres - 2 Line Outs/New Version

The Portable Audio Interface Studio 24c: The portable, ultra-high-def, USB-C audio interface.

Professional quality in your home recording studio and on the go. Great for recording studios, mobile musicians, guitarists, podcasters, and live streaming, the bus-powered Studio 24c 2-in, 2-out audio interface features 2 front-panel combo mic/line/instrument inputs with PreSonus XMAX-L solid-state mic preamps, 2 rear-panel line outputs, MIDI I/O, and onboard direct monitoring control. A complete, all-in-one home recording studio, the Studio 24c comes with PreSonus’ award-winning Studio One Artist music production software for macOS and Windows

• Award-Winning XMAX Preamps: The Presonus 68c Audio Interface boasts renowned XMAX preamps, recognized for their excellence in audio quality. Enjoy studio-grade sound with 24-bit, 192 kHz resolution for crystal-clear recordings and streaming.
• Versatile Connectivity: Equipped with two XLR/¼" combo inputs, MIDI I/O, and convenient A/B monitoring, this interface accommodates microphones, instruments, and external devices, making it perfect for musicians, podcasters, and content creators.
• User-Friendly Control: Manage your audio effortlessly with intuitive front-panel controls, including gain knobs and LED meters, enabling you to monitor and adjust levels at a glance.
• PreSonus Studio One Artist Included: Jumpstart your recording and production journey with the included PreSonus Studio One Artist software, bundled with this powerful digital audio workstation (DAW), all enhanced by the renowned XMAX preamps for top-tier audio quality.

PreSonus®' high-definition HD7 headphones take advantage of a patented, semi-open sound chamber to deliver exceptionally deep low frequencies with a balanced and yet powerful bass punch. Accurate midrange and extended treble response let you pick out the fine details of a mix or track. The lightweight, ergonomic design adjusts to any head size, offering a comfortable listening experience during long recording sessions. Whether you're monitoring, tracking, mixing, or just listening for pleasure, you can expect impressive sonic performance from your HD7 headphones.

Sound benefits
We think a good part of the "warmth" that is commonly associated with vintage gear comes from transformers -- and not only from tube circuits. With transformers low end and lower mids sound rounder, full-bodied with more punch. The top end gets a silky touch and benefits from improved presence without sounding boosted.
Reasons are reduced odd harmonics (which produce harsh top end imressions) and a slower characteristic compared to electronic stages (which causes a more voluminous sound). We recommend transformers since we experience their sound as refinement without disadvantage in any application.

Transformers in preamps
Used in preamps or channel strips, the input transformers add ca. 14dB (depending on the microphone) of gain. This must be added to the scaled values. The additional passive gain relieves the complete unit permanently at any gain level, thus improves signal quality.
That's why the input transformer is more important in preamps, but to benefit from all possible sonic improvement and operational safety, both input and output should be equipped with transformers. If SPL preamps only offer an input transformer option, the simple reason is not enough space ... if a unit offers an transformer option for inputs and outputs, we recommend to replace all electronically balanced stages.

Operational safety
Transformers transmit the signal by induction. This means there is no static connection (like a wire) to transmit the signal. This protects the unit from damage caused by power failures in the input/output connections. In addition, hum problems are effectively avoided if balanced connections are used throughout. Transformers are a must for units used in facilities that need highest operational safety (e.g. broadcasters). Another notable advantage for many live and recording applications is that much longer cable lengths are possible with no loss in sound quality.

The PRO MIXER DJX750 DJ Mixer merges intuitive operation with built-in digital effects processing for clean, transparent sound that will set your dance floor on fire! This 5-channel ultra-low noise mixer features our super-smooth Ultraglide faders and VCA-controlled Crossfader for an incredible lifespan; state-of-the-art 24-Bit digital effects with advanced parameter control; dual built-in BPM Counters with Sync Lock and Beat Assist to ensure your tracks merge seamlessly every time – plus a host of other truly-professional appointments.

The PRO MIXER DX626 is a professional high-quality 3-channel DJ mixer with integrated Beat-Per-Minute (BPM) counter, and embodies a proven 3-channel design loved by DJs worldwide – beginners and professionals alike. Its super-smooth, dual-rail “Ultraglide” crossfader with up to 500,000 life cycles guarantees years of flawless performance.

The 2-channel VMX100USB DJ Mixer is designed to connect directly to your computer and take your music straight into the digital realm. In an instant, the VMX100USB allows you to record and play any digital music file from your PC or Mac * computer – with no setup drivers required!

Dual intelligent, built-in BPM (Beats per Minute) counters with Sync Lock and Beat Assist help keep your tracks in sync – plus our VCA-controlled faders and crossfader ensure flawless performance. We’ve also included a free download for a massive software bundle that will transform your computer into a full-fledged music production and editing studio!

• Carrier Frequency: 2.404-2.474GHz
• Available Channel: 16 Channel
• Band Range: 2MHz
• Dynamic Range: 85dB
• Total Harmonic Distortion: <0.1%

• Power Supply: DC12-17V
• Consume Power: 2 WATT
• Signal / Noise Ratio: >95dB
• Receiver Sensitivity: 80dBm

• Transmitter Power: 10mW
• Modulation Type: GFSK
• Battery Voltage: 2x1.5V AA Battery
• Continuous Using: 5 hours

With the Marc One in your rig you'll be unstoppable. Despite its small size, it is engineered to cover a lot of ground. You'll be free to easily reference your tracks on up to two pairs of speakers, this can be adjusted at the flick of a switch. Speaker pair A also provides the opportunity for you to integrate a subwoofer into your set-up. This guarantees you don't just hear the bass - you'll feel it too! Thanks to cleverly devised electronics, you'll be able to easily switch between sources via the Marc One's line-level output. This ensures no signal will be sacrificed when making adjustments. For even more monitoring power, you have the choice of three monitoring modes. These include stereo, mono and channel swap.

The transition between headphones and speakers can feel strange when recording and mixing. The varied differences they offer can make it difficult for you to find "common-ground". SPL understand this and that's why the Marc One comes complete with three adjustable headphone parameters. Create consistency by manipulating the crossfeed, speaker angle and centre value parameters. Thanks to these innovative features you'll be able to match your headphones to the response of your speakers in the room. The centre level comes set at -1dB and the speaker angle to 30 degrees. This is a good place to start as it is reflective of generic, real world conditions. Adjust the crossfeed value to determine the crosstalk that occurs between the left and right channels.

• Monitoring controller made from the finest components
• Easily switch between between two pairs of speakers
• Speaker A contains subwoofer output
• AK4490 converter chip enables sampling frequencies up to 768kHz
• Comes complete with three monitoring modes
• Includes 12V plug-in power supply
• Create consistency between your headphones and speakers with headphone controls
• Class AB output provides enough power to suit most headphones

• Channels: Line 1 / Line 2
• Dimensions (W x H x D): 210 x 49.6 x 220 mm
• Weight: 1.4kg
• Product Code: MARC-ONE

Our entry model into the world of VOLTAiR headphone amplifiers.

The Phonitor se is focused on the essentials – without compromising on quality.
It has the same audio signal amplification as its bigger brothers Phonitor x and Phonitor xe.
With the optional DA converter, it can also play from digital sources.

The Phonitor Matrix provides two of the most common Phonitor Matrix settings as switchable presets. It lets you experience music on headphones as being played back through speakers.

Thanks to VOLTAiR technology in the highest sound quality.