Studio Care

• 3-way design offers maximum output, symmetrical 90° x 50° coverage and minimum distortion
• Optimized waveguide technology delivers a consistent pattern
• Two drive modes: passive and bi-amp
• Speakers integrate seamlessly with the entire JBL Cinema Series including 8102 surround and 3181F and 4281F subwoofers
• Optimize operation using dedicated presets in the JBL CPi2000 cinema processor
• Built-in crossover network
• Binding-post connectors on top of LF enclosure are easy to wire and save space behind the screen
• Transducer-protection circuitry prolongs equipment life
• 460W rated power
• 134 dB peak SPL
• Available as a complete system or as individual M/HF (3132-M/HF) and LF (HPD3159) modules in separate housings
• 4Ω impedance allows lower-power Crown XLC amplifiers to power the speaker system
• Frequency response: 50 Hz–18 kHz (-10 dB) (4π)
• Throw capability of up to 45 ft (14 m) suitable for 80–100-seat cinemas

Dual 8-inch (200mm) 2 ½-way Floorstanding Loudspeaker

Designed and engineered in JBL’s world-famous acoustic engineering facility in Northridge, California, the Stage A190 is the flagship of the JBL Stage Series. This floorstanding loudspeaker features a 2 ½-way design with patented High-Definition Imaging (HDI™) waveguide geometry, 1-inch (25mm) Aluminum dome tweeter, and dual 8-inch (200mm) Polycellulose cone woofers that provide deep, signature JBL bass.

2.5-Way Dual 8-inch (200mm) Floorstanding Loudspeaker

Designed and engineered at our world-famous Acoustic Engineering Center of Excellence in Northridge, California, the Stage 280F is the flagship of the JBL Stage Series. This floorstanding loudspeaker features a 2.5-way design with Next Generation patented High-Definition Imaging (HDI™) waveguide geometry, 1-inch (25mm) Anodized Aluminum dome tweeter, and dual 8-inch (200mm) Polycellulose ribbed cone woofers that provide deep, signature JBL bass.

• Custom-engineered 18-inch woofer
• Power: 1,500W peak / 750W RMS
• Frequency response: 31–150 Hz (-10 dB); 40–120 Hz (-3 dB)
• Max SPL: 131 dB
• Audio I/Os: 2 XLR Combo, 2 XLR loop-outs
• Advanced dbx DSP: Parametric EQ, polarity inversion, speaker delay
• Built-in 2-channel digital mixer
• Parametric EQ, polarity inversion and speaker delay
• Color backlit LCD screen provides easy access to functions
• Durable birch plywood cabinet with patented DuraFlex finish and metal grille
• Universal JBL Pro Connect app control using powerful BLE technology
• Ergonomic handles simplify transport
• Built-in threaded pole mount expands system configuration options
• Stackable cabinets simplify cardioid configurations and equipment storage
• Dimensions: 26.3 x 24 x 25.1 in (667 x 609 x 637mm) (HxWxD)
• Weight: 81.5 pounds (37 kg)
• Shipping dimensions: 29.6 x 28.42 x 29.3 x (744 x 722 x 752 mm) (HxWxD)
• Shipping weight: 94.4 pounds (42.8 kg)

Extend Your System Lf All The Way Down! The Lsr310s Subwoofer Incorporates Jbl’s Patented Slip Stream™ Port Working In Concert With A Custom 10" Down-Firing Driver And A 200 Watt Amplifier To Add Deep, Powerful Bass To Any Studio Monitor System. A Jbl First, The Xlf Extended Low Frequency Setting Lets You Hear Your Tracks With The Augmented Bass Tuning Used In Today’s Dance Clubs.

• Jbl Patented Slip Stream™ Port
  This Patented Jbl Port Design Works In Concert With The Lsr310s Low Frequency Driver For Deep, Dynamic Bass Response At All Playback Levels. The Double-Flared Shape Of The Port Is Precisely Calculated To Optimize Low-Frequency Extension.

• Xlf Extended Low Frequency Setting
  A Jbl First, The Xlf Setting Activates A Specially-Engineered Tuning That Emulates The Ample Bass Tuning Used In Today's Dance Clubs. When Producing A Dance Track, The Xlf Setting Will Inspire You And Bring A Bit Of The Club To Your Control From. For Inspiration To The Max, Position The Lsr310s In The Nearest Corner Of Your Room And Activate The Xlf Setting.

• Custom 10" Down-Firing High Excursion Low Frequency Driver
  Jbl Transducers Are Legendary For Their Performance. The Custom-Designed Driver In The Lsr310s Exemplifies Jbl Engineering Prowess, Delivering Deep Low Frequency Response Into The 20 Hz Region, And 113 Db Peak Output, For Long Periods At Full Rated Power With No Risk Of Failure.

• Professional Balanced Inputs And Outputs
  With Balanced Xlr And 1/4" Inputs And Xlr Outpus You Can Add The Lsr310s To Any Studio Monitor System To Extend Its Low Frequency Performance Or Use It As The ".1" Lfe Channel In A Surround Sound System.

• Selectable Input Sensitivity
  The -10dbv/+4 Dbu Sensitivity Switch Ensures Compatibility With A Broad Range Of Signal Sources, Allowing You To Connect The Lsr310s To High-Output Professional Equipment Without Any Danger Of Input Overload.

• Three Crossover Settings
  The 80 Hz Setting Is Recommended For Use With The Lsr305, Lsr308 Or Any Studio Monitors. The External Setting Allows Use Of An Outboard Crossover.

• Volume Control
  Simple And Effective, The Lsr310s Volume Control Has Detents That Make It Easy To Balance The Lsr310s In Your Studio Monitor System

• 134 dB peak SPL
• 18" Differential Drive® low-frequency driver for low-distortion and higher SPL
• Efficient Class-D amplifier technology
• DSP Input limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ
• Integrated stereo pass-thru, with selectable HP filter, and polarity reverse
• 2 x XLR-1/4" combination inputs, with 2 x XLR loop-thru
• • 20 mm threaded pole socket for solid, secure satellite speaker mounting.
• Multiple handles with comfort rubber grips for easy transport
• Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish.
• Cloth backed, dent-resistant 16 gauge steel grilles

10" 300 Watts powered subwoofer

10" (250mm) Polycellulose Low-Frequency Woofer

SRX818S is a single 18” subwoofer for concert, touring, or installed use. Featuring a standard M20 pole cup for use with top boxes, indexing feet for stacking in both the standard and cardioid position, and a 136dB max SPL, the SRX818S is an ideal solution for musicians, bands, and DJs, concert use, public speaking, or installations such as performance venues, corporate spaces, educational facilities or houses of worship. Tunings and presets are available for Crown ITech HD.

• StatusCurrent
• SegmentPro
• SeriesSubwoofers
• TypeSubwoofer
• Analog inputs2x balanced XLR, 2x unbalanced RCA phono
• Analog outputs2x balanced XLR, 2x unbalanced RCA phono
• Amplifier Power (Watt)500W
• AC Power Input100-120 V/200-240 V 50/60 Hz
• Auto on/offYes
• Max Stand-by Power Consumption (Watt)0,5
• Max Power Consumption (Watt)490
• Lower Cutoff (Hz @85 dB +/- 3 dB)16
• Upper Cutoff (Hz @ 85dB +/- 3 dB)230
• MAX SPL (dB)110
• Box PrincipleSealed
• Low pass filterAdjustable/Preset
• High pass filterAdjustable
• Phase adjustment0/180 degrees
• Woofer2x 9in MSP Hybrid Drive
• Weight kg22,1
• Weight lbs48,7
• Width mm447
• Height mm300
• Depth mm268
• Width inches17 5/8
• Height inches11 6/8
• Depth inches10 4/8
• Packaged Width mm600
• Packaged Height mm450
• Packaged Depth mm400
• Speakers per packaged box1

True bass. The 9S subwoofer is designed to complement LYD and other Dynaudio Pro studio monitors, including the classic BM range.

Studio-quality components and construction make the 9S, with its double front baffle and brand-new 9in long-throw driver, the ideal subwoofer for your mixing and mastering projects. We made it a priority to make the 9S compact while ensuring that you get the utmost sonic accuracy. In terms of size, it resembles the BM 9S II that it replaces, but when it comes to performance, it’s actually more comparable to the larger BM 14S II.

The 9S will expand any studio monitor setup regardless of whether you’re working in stereo or surround. Its massive yet tight low-end takes the burden off your monitors – letting them focus on delivering the frequency range above 50-150Hz, depending on how you set the crossover filter.

A long-throw driver ensures the necessary movement to reproduce super low-end frequencies all the way down to 22Hz in great detail. Running the show is a 300W Class D amplifier module that significantly outperforms the previous BM 9S II.