Studio Care

VF211060 is a two channel UHF wireless receiver rack working with the microphone transmitters VF11 and the pocket transmitters VFI2. Each receiver can operate up to 99 preset frequencies in the UHF local authorized Bands. An Auto-scan function is available to identify free-intermodulation carrier frequencies when a new preset is needed. The infrared frequency synchronization system makes easy to synchronize with any new transmitter quickly without any manual setting. Each receiver features a LCD screen displaying the preset number, the frequency value, the battery lie time of the transceiver, and the quality of the RF and AF signals. Two independent XLR balanced outputs corresponding to each output are available plus a line output pre-mixing the two channels in one single output.

VF211060 is a two channel UHF wireless receiver rack working with the handheld microphone transmitters VF11 and the pocket transmitters VF12

•  2 channel UHF receiver
• Auto-Scan
• Infrared frequency synchronization
• 99 frequency presets
• Compliant with local frequency regulations (USA, Europe, etc.)
• Coverage ~60mts

The UAFX Woodrow '55 Instrument Amplifier pedal gives you the legendary American tweed tube amp sounds used by artists and producers for decades, from The Eagles to Chuck Berry to Neil Young.

Built on powerful dual-engine processing and UAD modeling expertise, the Woodrow '55 effects pedal packs sweet cleans, rich overdrive, and grungy distortion.

Get the best emulation of a mid-'50s American tweed amp ever packed into a pedal

Go from dapper to dangerous with classic tube tones

Take world-class studio amp sound anywhere, complete with mic/speaker pairings and preamp boosts

Download artist tones, customize features, explore presets, and more with UAFX mobile app

Whether it's replacing your amp rig and going direct to front?of?house on stage, or recording tracks into your DAW — Woodrow '55 gives you the inspiring, album?ready tones of an expertly miked "golden unit" vintage tweed amp, within seconds.

Take your rowdy tweed tones further using tried-and-true British speaker swaps and boosts — including preamps from the iconic KORG SDD-3000 rack unit and Maestro EP-3 tape delay — at the flip of a switch.* Only Woodrow '55 puts authentic tube growl and hot?rod mods under your chucks, docs, or crocs.

Woodrow '55 gets even better with the UAFX Control mobile app. Download custom artist tones, recall and archive your presets, and delve into the tweed amp that started it all.

Imagine diving into the world of ultimate convenience and control with the additional UL 1000G2-R receiver. It's your perfect sidekick for cable-free and hassle-free live performances and studio setups. Our top-of-the-line IEM system delivers exceptional audio quality that allows you to make confident decisions. With a range of pro-level features, including:

• Mono/Stereo modes
• Squelch control
• Stereo Mix
• Gain control
• Easy channel selection
• Super intuitive operation

UL 1000G2-R has everything you need to elevate your audio game. And best of all, we’ve made it really affordable.

• Eight world-Class Audient Console mic preamps
• Two Retro Channels with Dual Stage COLOUR Saturation Controls – HMX & IRON
• Two Discrete JFET instrument inputs
• Pristine 118-dB Burr-Brown A-D converters
• Balanced analog line outputs
• Word clock input
• iD ScrollControl mode
• All-metal enclosure

Specifications:

• Preamp Type Solid State
• Number of Channels 8
• Phantom Power Yes
• Analog Inputs 8 x XLR/TRS Combo, 2 x 1/4″ (DI)
• Analog Outputs 1 x DB-25
• Digital Outputs 1 x ADAT
• Rack Spaces 1U
• Height 1.75″
• Depth 11.27″
• Width 19″
• Weight 9.92 lbs.
• Manufacturer Part Number ASP800

• Preamp Type:Solid State
• Number of Channels:8
• Phantom Power:Yes
• Compressor:Yes, per channel
• Sample Rate:Up to 192kHz
• Bit Depth:24-bit
• Analog Inputs:8 x XLR-1/4" combo
• Analog Outputs:8 x 1/4"
• Digital Inputs:2 x Optical Toslink (ADAT)
• Digital Outputs:2 x Optical Toslink (ADAT)
• Clock I/O:In/Out
• Software:Focusrite Red Plug-in Suite, Softube Time & Tone Bundle
• Rack Spaces:1U
• Power Source:Standard IEC AC cable
• Depth:11.26"
• Weight:7.4 lbs.
• Manufacturer Part Number:AMS-SCARLETT-OCTOPRE-DYNA

Dynatech's HP Series power amplifiers are built around robust and advanced toroidal transformers, and deliver clean power on demand. The advanced protection circuitry guards against short circuit, over load, clip limit, peak current limit, over heat and open circuit, and also protects against ultrasonic and RF interference.

A high current power supply increases reliability and performance. Other features include center-detented gain controls, input peak limiter and fast recovery to ensure low distortion. The variable speed fans effectively cool the amp and protect against overheating. Input is through XLR or 1/4" connectors, while you can use Speakon-type or binding post connectors for output.

Dynatech HP Series Amplifiers are specially designed for professionals who value high power, audio clarity, reliability and lasting performance.

This amplifier is a representation of Dynatech’s continuing commitment to produce the best and highest quality audio products at an affordable price. These amplifiers are designed to provide a big impact in sound reproduction.

The DynaTech V PLUS Series is based on the same advanced circuit topologies that have made DynaTech amplifiers the choice of touring professionals worldwide. V PLUS Series amplifiers are designed for high operating efficiency and accurate sonic performance across the full audio bandwidth, even under stressful conditions. Internal components are the finest available, and key sub-assemblies are pre-tested before final assembly. Finally, each amplifier is "burned in" and thoroughly tested (using precision audio test equipment) before shipping. In addition, all V PLUS Series amplifiers incorporate DynaTech’s exclusive Tour Class protection features to safeguard both internal circuitry and connected loudspeakers. This proven combination of advanced design, quality construction, and comprehensive circuit protection is your guarantee of fail-safe reliability. You can depend on consistent, stable performance even when your V PLUS Series amplifier is subjected to punishing extremes in the most demanding fixed or mobile sound reinforcement applications

• ffordable, reliable power perfect for DRM Series Passive Loudspeakers, installations, and production audio systems
• Forced-air ventilation keeps the amplifier running cool
• Power output:
• 1000W Continuous power @ 8 ohms per channel
• 1350W Continuous power @ 4 ohms per channel
• 2700W continuous power @ 8 ohms bridged
• Selectable parallel/stereo/bridged operating modes
• Independent level control per channel
• Selectable input sensitivity
• Signal, Clip, and Fault LEDs per channel
• Short, under-impedance, over-current and thermal protection
• XLR input and Thru per channel
• NL4 outputs
• Robust, impact-resistant, all-steel 2U rackmount chassis

The PK115A is a super compact, exceptional 2-way, 800-Watt powered PA sound-reinforcement loudspeaker with built-in media player and Bluetooth * that is ideal for live sound, portable PA, Karaoke, monitor wedge and House of Worship applications.

This amazingly self-contained PA solution that merges state-of-the-art, 800-Watt Class-AB power amp technology with an integrated 3-channel mixer and 2 standalone microphone channels, built-in Bluetooth * , a high-performance MP3 player with USB stick/SD/MMC card and built-in wheels for effortless transport. A convenient Power Line output allows you to connect multiple PK115 passive speakers. Sound reinforcement has never been so easy!

• Portable Design
• Overload & low voltage protection
• Desktop design
• Extendable with its preamp/line output
• For various PA applications
• AC & DC Power Supply
• Rated Power (at THD 10% 240 VAC,1kHz,4Ω) : 500 W
• DC Power Supply Output Power : ≥ 50% rated power
• Tone Controls (Bass) : ± 10 dB at 100 Hz
• Tone Controls: 2 x ( ≥ 16 AWG) Cables
• 4Ω/8Ω & 70/100V,Barrier Strip (with touch proof cover)
• Frequency Response : 50-15,000 Hz ± 3dB
• Output Regulation : ≤ 3 dB,no load to full load at 1kHz
• Signal to Noise ratio : ≥ 70 dB

• The PC-D / DI series are so much more than just amplifiers—they are the first power amps ever to be capable of forming the core of a completely connected audio network for multi-zone installed or live sound applications. The ever-changing demands and rapid advances of amplifier technology and sound reinforcement in general require both versatility and power, and this series has plenty of both. Now you can leverage the power and flexibility of the most comprehensive matrix processing to be found on a power amplifier, all enhanced by the simplicity and ease of Dante connectivity, to create a fully integrated, effective sound solution. What’s more, full compatibility with ProVisionaire series gives you complete control over the entire network chain, from mixers through to amplifiers, processors, and speakers. In short, the PC-D / DI series gives you what every sound engineer has always dreamed of—total control.

• The PC-D / DI series are so much more than just amplifiers—they are the first power amps ever to be capable of forming the core of a completely connected audio network for multi-zone installed or live sound applications. The ever-changing demands and rapid advances of amplifier technology and sound reinforcement in general require both versatility and power, and this series has plenty of both. Now you can leverage the power and flexibility of the most comprehensive matrix processing to be found on a power amplifier, all enhanced by the simplicity and ease of Dante connectivity, to create a fully integrated, effective sound solution. What’s more, full compatibility with ProVisionaire series gives you complete control over the entire network chain, from mixers through to amplifiers, processors, and speakers. In short, the PC-D / DI series gives you what every sound engineer has always dreamed of—total control.

This amplifier is a representation of Dynatech’s continuing commitment to produce the best and highest quality audio products at an affordable price. These amplifiers are designed to provide a big impact in sound reproduction.

The DynaTech V PLUS Series is based on the same advanced circuit topologies that have made DynaTech amplifiers the choice of touring professionals worldwide. V PLUS Series amplifiers are designed for high operating efficiency and accurate sonic performance across the full audio bandwidth, even under stressful conditions. Internal components are the finest available, and key sub-assemblies are pre-tested before final assembly. Finally, each amplifier is "burned in" and thoroughly tested (using precision audio test equipment) before shipping. In addition, all V PLUS Series amplifiers incorporate DynaTech’s exclusive Tour Class protection features to safeguard both internal circuitry and connected loudspeakers. This proven combination of advanced design, quality construction, and comprehensive circuit protection is your guarantee of fail-safe reliability. You can depend on consistent, stable performance even when your V PLUS Series amplifier is subjected to punishing extremes in the most demanding fixed or mobile sound reinforcement applications