Studio Care

Output Power: 2500W peak@4Ω

Transducer Low: 12” (305mm) woofer; 3” (76.2 mm) high-temperature voice coil

Frequency Response: 44 Hz– 95 Hz (-3 dB)

Frequency Range: 38 Hz–110 Hz (-10 dB)

Maximum SPL: 130 dB (@1m)

Connections: (2) XLR+1/4” (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input

External Controls:  Volume control, signal/clip limiter with LED, speaker use button, proximity button, power switch with LED

Electronic Protections: Electronic clip, thermal and transducer overdrive protection

Enclosure: Internally braced MDF cabinet; 36mm mounting pole socket on top panel

Power Connection: Standard IEC cable.

Input Voltage: 100-120, 50/60 Hz; 220-240V AC 50/60 Hz

Consumption: 1600W

Fuse: 100-120V, T15AL AC250V; 220-240V, T8AL AC250V

Dimensions (height x width x depth): 17.9” x 18.1” x 19.9” / 454.7 x 459.7 x 505.5 mm

Weight: 57.1 lbs / 25.9 kg

Ooberpad brings you the Polk Audio DSW PRO 550 wi - an audiophile-grade powered subwoofer for home theatre systems. Featuring a patented Dynamic Balance 10" high-excursion transducer, the subwoofer is driven by a high-damping 400 W class D amplifier. This powered subwoofer deploys Polk Audio's exclusive Feed Forward™ technology that reduces audible distortion without limiting the subwoofer volume. The final result is a deep, impactful, and powerful bass response across the entire frequency range, even at high volume levels.

The Polk Audio DSW PRO 550 wi also integrates the Polk Room Optimizer™ - a innovative feature that lets you specify the location of your subwoofer from four placement options — corner, mid-wall, in-cabinet, or mid-room — to automatically optimize and equalize the frequency response for smooth bass output. The subwoofer's intuitive night mode dynamic range compression lets you to enjoy good quality bass without disturbing other family members at night. Interestingly, the removable feet lets you use PRO 550 wi in either front-firing or down-firing mode, based on your preference. Featuring a rock-solid MDF enclosure construction with optimized bass-reflex ports, the DSW PRO 550 wi subwoofer delivers powerful bass response from a large subwoofer from a compact and low profile.

• designed to work with (sold separately)
  • Polk Adjust EQ automatically balances the settings of your React Sound Bar to account for the subwoofer
• 7" long-throw, high-excursion woofer delivers deeper bass than a traditional sub of the same size
• flared port tube keeps turbulence low for precise bass
• slim, compact design and clean look fits most rooms
• wireless with simple setup for easy placement
• 8-5/8"W x 13-3/4"H x 16-1/2"D
• weight: 16.5 lbs.
• warranty: 5 years (woofer); 1 year (amplifier)

Enhance movie, music, and gaming sound with deep, effortless bass from a compact subwoofer.

• 10" Dynamic Balance® driver
• 100W peak power using Class D amplification
• Bass response down to 24Hz
• Low-resonance cabinets

• Add Polk’s Legendary, Effortless Bass to Your Music, Movies, TV and Video Games.
• Long-Throw, High Excursion 12” Dynamic Balanced Woofer for Deep Impact with Low Distortion
• Powerful and Efficient 100W Class A/B Amplifier for Loud, Clean, and Responsive Performance
• Smooth Low Frequency Extension Down to 24hz, Perfect for Bass Heavy Music and Movie Action
• Fine Tune to Your System with Volume, Consistently Variable Crossover (80–160Hz) and Phase Polarity (0/180) Control

• Bass-reflex (ported) enclosure
• 50-watt RMS amplifier
• 10" front-firing driver
• Frequency response 40-160 Hz (-3dB)
• Continuously variable 80-160 Hz crossover
• Phase switch
• Auto on/off
• Speaker and line-level inputs; speaker-level output
• Black oak vinyl finish
• Removable grille included
• 14"W x 14-3/8"H x 16-3/16"D

Output Power: 2500W peak@4Ω

Transducer Low: 18” (457 mm) woofer; 3” (76.2 mm) high-temperature voice coil

Frequency Response: 35 Hz–100 Hz (-3 dB)

Frequency Range: 27 Hz–111 Hz (-10dB)

Maximum SPL: 137 dB (@1 m)

Connections: (2) XLR+1/4” (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input

External Controls:  Volume control, signal/clip limiter with LED, speaker use button, proximity button, power switch with LED

Electronic Protections: Electronic clip, thermal and transducer overdrive protection

Enclosure: Internally braced MDF cabinet; 36 mm mounting pole socket on top panel. Caster Insert Thread Gauge: M6 x 1.00mm

Power Connection: Standard IEC cable.

Input Voltage: 100-120, 50/60 Hz; 220-240 VAC 50/60 Hz

Consumption: 1600W

Fuse: 100-120V, T15AL AC250V; 220-240V, T8AL AC250V

Dimensions (height x width x depth): 26.7” x 20.9” x 24.7” / 678.2 x 530.9 x 627.4 mm

Weight: 93.0 lbs / 42.2 kg 

Ooberpad brings to you impactful Polk Audio Atrium Sub100 10 inch Outdoor Subwoofer. Heavy-duty bass performance comes with powerful all-weather durability that delivers indoor-level bass impact outdoors, or in your home's transitional area. Polk Audio Atrium Sub100 Outdoor Subwoofer makes the experience more enjoyable for the audiophile community. 

The Sub100 complements perfectly to a set of Sat300s and rounds the system out with the full dynamic performance of a high-end, smart audio system. Pick the color that matches the décor in your sunroom or by the pool, and you have hit it out of the park!

Bring on some serious bass fun, with the cool Sub100, and have a lit party.

The WS-6.2 is a studio subwoofer with two 6.5-Inch horizontally opposed woofers. Taking up less than half the space of comparably performing subwoofers, it is ideal for stereo mix setups where space is at a premium.

The WS-6.2 is tailor made to be a companion sub to Kali’s LP-Series and IN-Series monitors, but it will also integrate well with just about any pair of studio monitors.

ADAM Audio SUB2100 Active Subwoofer Overview:

ADAM Audio has developed the unique Sub2100 subwoofer for the special requirements of large control rooms and studios. The Sub2100 combines a huge 21.5″ woofer and an amplifier capable of 1000W continuous power housed in a bass reflex enclosure tuned for reproducing frequencies down to 18Hz. The sheer power and extremely high efficiency (99dB/ W/m) enable this system to produce linear SPL peaks of ≥128dB without any significant compression.

The world‘s largest voice coil

Essential to the volume of this woofer is the gigantic 6” voice coil. Equipped with this voice coil, the Sub2100 is capable of reaching the highest SPLs in the lowest frequencies that can be perceived by the human ear. On every level, the Sub2100 establishes a new benchmark in subwoofer technology.

• 8inch bass-reflex powered subwoofer
• 22Hz - 150Hz frequency response
• High-power 150W amplifier
• LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
• PHASE switch

Our EUROLIVE B1200D-PRO 500-Watt active subwoofer provides the ultimate in low-frequency reproduction, and the built-in stereo crossover makes it ideally suited for use with any of our active 2-way loudspeakers. Packed with a powerful 500-Watt Class-D amplifier, 15" long-excursion Low-Frequency (LF) transducer and an incredible array of professional features, the B1200DPRO produces extreme levels of low-end punch, with the definition and clarity typically reserved for much larger systems!

Put simply, these cool-running systems are much lighter, making them ultra-easy to transport and set up – and our no-compromise design means you get amazingly-deep, chest-pounding bass that will keep the party going all night long.

Designed to complement any full-range PA loudspeaker, and a perfect companion for the PreSonus® AIR-series, the AIR18s active subwoofer delivers a powerful, clear and accurate low-end punch. With its 18-inch low-frequency transducer, driven by 1,200 watts (peak) of Class D power, it provides plenty of detailed bottom end, all the way down to 30 Hz.

Despite its power, the AIR18s is portable, compact and lightweight, with a rugged, tour-grade birch enclosure. It's easy to transport and suitable for mobile applications, as well as installs, with integrated provisions for the included caster kit, ground-stacking provisions and ergonomic handles on both sides.

AIR-series subwoofers feature easy-to-use controls and signal-processing presets. Set them for normal front-of-house use or boost the low-end with the Mo' Bass preset. Reverse polarity, use the lowpass filter to set a crossover frequency, adjust the power amp's master output level, even turn the grille LED off for installs - all at the touch of a button. A variable alignment delay properly aligns your three-way system.

Most subwoofers are essentially omnidirectional, which can cause feedback onstage and make monitoring difficult. Creating a subwoofer array helps keep excess energy off of the stage and in the audience. AIR-series subwoofers provide the tools you need to create these arrays with ease.

Most important, the AIR18s sounds great, delivering outstanding low-end clarity and natural music reproduction.

Output Power: 2500W peak@4Ω

Transducer Low: 15” (381 mm) woofer; 3” (76.2 mm) high-temperature voice coil

Frequency Response: 36 Hz–110 Hz (-3 dB)

Frequency Range: 31 Hz–123 Hz (-10 dB)

Maximum SPL: 132 dB (@1m)

Connections: (2) XLR+1/4” (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input

External Controls:  Volume control, signal/clip limiter with LED, speaker use button, proximity button, power switch with LED

Electronic Protections: Electronic clip, thermal and transducer overdrive protection

Enclosure: Internally braced MDF cabinet; 36mm mounting pole socket on top panel. Caster Insert Thread Gauge: M6 x 1.00 mm

Power Connection: Standard IEC cable.

Input Voltage: 100-120, 50/60 Hz; 220-240VAC 50/60 Hz

Consumption: 1600 W

Fuse: 100-120V, T15AL AC250V; 220-240V, T8AL AC250V

Dimensions (height x width x depth): 21.3” x 20.6” x 24.7” / 541 x 523 x 627 mm

Weight: 87.1 lbs / 39.51kg 

Specifications

• A True Workhorse for Gigging Professionals
• 1400W Class-D amplifier is designed for ultra-reliable consistent performance
• 15” High-performance woofer
• Built-Like-A-Tank to conquer every gig while lightweight for easy loading
• Frequency response: 36Hz - 200Hz
• Max SPL: 131 dB
• Voicing Modes
• Flat – Natural balance between deep bass and overall output
• Deep – Emphasizes ultra-low frequencies. Great for dance rap and electronic music
• Punch – Prioritizes highest possible output level. Great for bands and rock music
• Variable
• Optimize for Your System
• Variable crossover frequency
• Polarity invert switch
• Defeatable front LED
• Stereo or mono summing for single or dual subwoofer deployment
• Variable level control (-6dBU to +6dBU)
• Front LED On/Off
• Versatile I/O
• Stereo XLR inputs
• Stereo full-range XLR outputs
• Stereo high-pass XLR outputs
• Versatile configuration options
• Integrated M20-threaded pole mount
• Weight: 52.3 lb / 23.72 kg
• Dimensions: 18.6 x 18.2 x 23 in / 472 x 462 x 584 mm (HxWxD)

19 Hz - 100 Hz (± 3 dB)

Low cutoff -6dB
19 Hz

High cutoff -6dB
150 Hz

Peak SPL
≥118 dB

Maximum peak SPL output with random pink noise, measured in half space at 1 meter.

Short term max SPL
≥113 dB

Maximum short term sine wave SPL output averaged from 30 to 85 Hz, measured in half space at 1 meter.

Self-generated noise
≤5 dB SPL

Self generated noise at 1 m on axis (A-weighted).

Height
625 mm (24 5/8 in)

Width
555 mm (21 7/8 in)

Depth
496 mm (19 1/2 in)

Enclosure type
Reflex port

Driver type
Cone

(no magnetical shielding)

Diameter
305 mm (12 in)

400 W Class D

100-240 VAC 50/60Hz

ISS Active
≤1 W

Idle
≤20 W

Full output
400 W

8 x Input

7.1 Analogue XLR input connectors XLR female, balanced 10 kOhm.

8 x Output

7.1 Analogue XLR output connectors XLR male.

Input

Digital signal input connector XLR female 110 Ohm.

Output

Digital signal output / Thru connector XLR male 110 Ohm.

2 x Control

Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.

Input

Link In connector.

Output

Link Out connector.

33 Hz - 85 Hz (± 3 dB)

Low cutoff -6dB
30 Hz

High cutoff -6dB
90 Hz

Short term max SPL
≥100 dB

Maximum short term sine wave SPL output averaged from 40 to 85 Hz, measured in half space at 1 meter.

Self-generated noise
≤5 dB SPL

Self generated noise level in half space at 1 m (A-weighted).

Height
410 mm (16 1/8 in)

Width
350 mm (13 3/4 in)

Depth
205 mm (8 1/8 in)

Enclosure material
MDF

Enclosure type
Reflex port

Driver type
Cone

Diameter
165 mm (6 1/2 in)

50 W Class D

A high-efficiency, low-distortion 50W Class D amplifier with integrated driver protection circuitry.

100-240 VAC 50/60Hz

ISS Active
≤0.5 W

Idle
≤5 W

Full output
70 W

2 x Input

Analog signal input connector XLR female, balanced 10 kOhm.

2 x Output

XLR male.