Studio Care

The POWERPLAY P1 Personal In-Ear Monitor (IEM) Amplifier puts control where it’s most useful – right at the artist’s fingertips. Whether on stage or in the studio, the P1 provides performers and recording artists with a dependable and affordable personal monitoring solution.

Our EUROLIVE VQ1800D 500-Watt active subwoofer provides the ultimate in low-frequency reproduction, and the built-in stereo crossover makes it ideally suited for use with any of our active 2-way loudspeakers. Packed with a powerful 500-Watt Class-D amplifier, 18" long-excursion Low-Frequency (LF) transducer and an incredible array of professional features, the VQ1800D produces extreme levels of low-end punch, with the definition and clarity typically reserved for much larger systems! Put simply, these cool-running systems are much lighter, making them ultra-easy to transport and set up – and our no-compromise design means you get amazingly-deep, chest-pounding bass that will keep the party going all night long.

This energy efficient AC power adaptor is ideal for Yamaha’s entry-level keyboards and an accessory every keyboardist needs.

Do away with your constant need for fresh batteries, and don’t risk losing out on the great song you just wrote. Save energy as you just plug in the PA-130B which is highly durable.

AC Power Adapter for hi-end Portable Keyboards. Note: The shape of the plug may differ by location.

The Crossover is one of a kind.
It is analog! No DSPs, no AD/DA conversion.
It is active! It fits to all kinds of speakers.
You can tune crossover frequencies and phase response all in
the analog domain in real time with real switches and controls. And –of course–
with SPL’s unique VOLTAiR technology. That means headroom, dynamic range and
real sound in abundance.

Crossover
When you add a subwoofers to your top/main speakers the
crossover is most often digital. That is been sold as a plus – but it isn’t.
Because digital signal processing involves AD-conversion, DSP processing and
DA-conversion. The audio signal undergoes significant treatments and at least
the extra AD/DA conversion does not amuse audiophiles. 
But now, here is the solution: the SPL Crossover. Fully
analog, 120V-VOLTAiR technology, user friendly and amazing sounding.

X-Over frequencies
The Crossover is split into two sections: the LOW section
for the subwoofers (mono or stereo) and the MID-HI section for the top/main
speakers. 
The crossover frequencies for LOW and MID-HI are identical
and can be switched individually from 50Hz to 120Hz in 6 steps. 
The LOWpass filter is 24dB/octave steep. The MID-HIpass
filter can be switched from 12dB/octave to 24dB/octave. Set to 24dB/octave both
filters operate in a Linkwitz/Riley design.

Phase control
The Crossover features a fully variable phase control to
perfectly allign the phase of the subwoofer(s) to the top/main speakers. 
The Phase control can be switched off and taken out of the
signal path if not needed to maintain the shortest possible signal flow. 
If needed, the toggle switch engages the Phase control at 0°
phase or at -180° phase. From these two starting points the phase can be varied
from 0° to +180° resulting in a full 360° phase circlewith the Phase control
pot.

Mono/Stereo
The LOW section features a Mono/Stereo toggle switch. 
In case you have two subwoofers (one for each L and R) this
switch should be set to Stereo. If you only use a single subwoofer this switch
should be set to Mono. The Crossover generates a mono signal of the LOW
frequency content and puts it out on both LOW outputs (L + R). You can decide
which one to use.

X-Over on/off
The MID-HI filter can be switched on and off. This is useful
in case the top/main speakers shall operate full range and only the LOW filter
shall roll off the subwoofer at a defined frequency.

Low Cut
An additional Low Cut filter is provided to cut all
frequencies below 20Hz. This is especially useful to relieve the power
amplifiers from amplifying inaudible very low frequent signals that only cause
the chassis to moves excessively.

Low Level
The output level of the subwoofer can be varied from -10dB
to +10dB. After setting the crossover frequency and aligning the phase the
level is the third control parameter. 
We have opted for a big knob because this control is not
only to adjust the speaker system but it can also be fun to use when recordings
lack bass content or the medium does not delivery much bass like vinyl.

VU meters
The two VU meters show the volume units. It’s mechanical
design “slows” the measurement, averaging out peaks and troughs of
short duration, and reflects thereby more the perceived loudness or
‘energy’. 

The amazing PMP1680S Powered Mixer packs tremendous power (2 x 800 Watts stereo or 1,600 Watts in Bridged mode), while maintaining an incredible power-to-weight ratio. These mixers employ high-efficiency Class-D technology and a state-of-the- art switch-mode power supply, which significantly reduces weight and heat. The 10-channel PMP1680S features 8 high-quality mic preamps, 2 stereo channels, dual 24-bit Multi-FX processors with 100 awesome presets including studio-class reverbs, delays, pitch shifter and various multi-effects, plus a 7-band stereo graphic EQ with our proprietary FBQ Feedback Detection System – for the ultimate in feedback-free performance.

• Pack1
• ColourPastel Grey
• Dimension600 x 757 x 450 (W x H x D)
• Capacity15U

PRICE ON REQUEST-+ADD TO LISTCharacteristics Product Features

• Our complete, and thoughtfully designed wallmounting cabinets provide a convenient and easy to use solution, perfect for secure networks, small data closets, retail, educational, edge computing, and all areas where floor space is limited. The wall mount cabinets ship completely assembled which speeds installation time.

Main Features

• Provision to mount the cooling fans on the top panel


• Powder coated finish for longer life


• Top panel with ventilation and cable entry facility


• Lockable Toughened Glass Door


• Adjustable equipment mounting


• Precision Engineering